Extension Cable, 3.5 m for Pt1000/1-Wire, tele plug male/female
The “Test Plugs” probe, also called “binder probes”, offers an excellent solution to get high accuracy and quick response as the sensor is inserted in the flow.
They eliminate the temperature pockets that delay response and create a risk for freezing at low temperature and the sensors can easily be removed for calibration. Type C – Probe is 150 mm long with 3 mm diameter with an angle to give a good hold when it is inserted or removed.
ClimaCheck offers test plugs in brass or stainless steel with 15 mm pipe thread short or extended 45 mm to reach above insulation.
This sensor is also suitable to insert in air flow as it can easily be pushed through seals and/or fixed in position well away from walls.
ClimaCheck has developed a range of sensors specifically designed for high quality measurements on HVAC systems. The standard sensor is suitable for surface mounting on tubes at the same time as it has to sustain the rough handling it will be exposed to in a machine room. Standard sensors are available with 5 or 10 m high-quality silicon cable and with or without tele plug.